Vogels PFT 8810 - Manual (Page 7)

www.vogels.com 9532-010-Z01-00
x4 x4 x4 x4
1
3
2
4 20
18
19
17
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFT8810
Place the left and right mounting bracket (kickstand facing
in on both brackets) and confirm the center of the bracket
“notch” is exactly center between the top and bottom edge of
the display and secure with the four each appropriate pitch
and length screws supplied for your display. Note: accessory
plastic spacer are supplied in case separation between the
bracket and the display is require for clearance purposes.
Place the first flat panel display face down on a smooth flat
surface and confirm the mounting depth and thread pitch or
your display using the depth gauge supplied.
Once center and level of the brackets are confirmed secure
the bracket firmly to the display. Repeat this procedure for
all nine display being installed. Confirm the upper adjust-
ment screws are center together by confirming all three
notches are aligned.