Vollrath Mix30 - Manual (Page 4)

English
Mixer
4
1 I
MPORTANT SAFETY SUGGESTIONS AND PRECAUTIONS
CAREFULLY READ THE INSTRUCTIONS CONTAINED IN THE PRESENT OPERATING INSTRUCTIONS MANUAL
BEFORE INSTALLING AND OPERATING THIS DEVICE. THESE INSTRUCTIONS HAVE BEEN DRAFTED FOR
THE SAFETY OF INSTALLATION, OPERATIONAND MAINTENANCE OF THIS DEVICE.
„ The present manual of Operating Instructions, placed on the device in the packing and supplied with the Technical
Handbook, the EC’s conformity certification and the electrical tests schedule, is an essential part of the mixer (also
defined, in the present manual of operating instructions, simply with the term, device) and must be preserved for any
future consultation.
„ The technical handbook must always be given, together with the device, to the Assistance Service’s personnel or to the
technicians, to whom you will eventually request assistance.
„ In case of selling or transferring to other user, all the above mentioned documentation must be handed to the new user,
so that he can be informed of the operation and relative technical information and safety instructions.
RESIDUAL HAZARD: DURING THE HOT AND COLD MIXING CYCLES, THE
PRODUCT BECOMES VERY HOT (+65...+85°C). SERIOUS HEALTH DAM-
AGE CAN BE CAUSED BY CONTACT WITH THE LID [5], THE TAP [11] AND
THE DEVICE'S SURFACE [35] TOO. WHEN LID IS OPENED THE MACHINE
STOPS, HOWEVER, THE MIXTURE REMAINS VERY HOT.PLEASE FOL-
LOW THESE RULES:
„ Always check that the heating and cooling mixing cycles are completed or the
product’s temperature, as shown on the display, is sufficiently low before opening
the lid or the tap.
„ Pay attention if an electrical power supply failure (or a blackout) occurs during a hot and cold mixing cycle, as the
mixture’s temperature inside the tub could be still very high and the device thermometer would not be able to display it.
„ If in doubt whether the mixture’s temperature is sufficiently low, do not open the lid or the tap, unless it is absolutely
necessary. Should this occur, wear protective clothing (gloves, overalls, etc.), in order to avoid direct contact with the
product.
DO NOT INTRODUCE YOUR FINGERS OR OBJECTS IN THE DEVICE’S LOOPHOLES.
DO NOT REMOVE OR HIDE, FOR ANY REASON, ANY LABEL APPLIED ON THE DEVICE.
NEVER OPEN THE PROTECTING PANELS. THE DEVICE DOES NOT CONTAIN, IN ITS INSIDE, PARTS WHICH
CAN BE OPERATED BY THE USER.
THE USER MUST NOT EXECUTE OPERATIONS WHICH ARE NOT CLEARLY CONTAINED IN THE PRESENT
USER’S MANUAL. ANY OPERATION WHICH REQUIRES TOOLS NOT GIVEN IN THE DEVICE’S EQUIPMENT
IS TO BE CARRIED OUT ONLY BY THE ASSISTANCE SERVICE OR BY TECHNICALLY AUTHORISED PER-
SONNEL.
„ Always unplug the device before undertaking any operation requiring access to the device’s moving parts (i.e. the
beater).
„ Any modifying of the electrical supply must be exclusively performed by professionally qualified and certified personnel.
„ Any use of the machine other than heating and cooling mixture is considered improper.
„ Do not connect and/or operate the device when any part is missing, except for specifically mentioned cases.
„ The device has been made to be operated by adults, prohibit children to play with it.
„ Modifying, or attempting to modify this device, can be dangerous and would void any type of warranty.
„ Always use original spare parts.
„ In the event of the use of the device being no longer required, deactivate the machine by severing the electric cable (after
unplugging it from wall socket). In addition, follow these recommendations:
- avoid dispersing the freezing gas and the oil contained in the device;
- carry out the draining and/or recycling according to the local provisions of the law currently in force on this matter.