Olympus XZ-10 - Manual (Page 68)

68 EN
Usage T
ips
7
Monitor indication Possible cause Corrective action
The Image Cannot Be
Edited
Pictures taken with another
camera cannot be edited on this
camera.
Use image processing
software to edit the picture.
m
The internal temperature of
the camera has risen due to
sequential shooting.
Turn off the camera and wait
for the internal temperature
to cool.
Internal camera
temperature is too high.
Please wait for cooling
before camera use.
Wait a moment for the camera
to turn off automatically. Allow
the internal temperature of
the camera to cool before
resuming operations.
Battery Empty
The battery is drained. Charge the battery.
No Connection
The camera is not connected to
the computer or printer correctly. Disconnect the camera and
connect it again correctly.
No Paper
There is no paper in the printer.
Load some paper in the
printer.
No Ink
The printer has run out of ink.
Replace the ink cartridge in
the printer.
Jammed
The paper is jammed. Remove the jammed paper.
Settings Changed
The printer's paper cassette has
been removed or the printer has
been manipulated while making
settings on the camera.
Do not manipulate the printer
while making settings on the
camera.
Print Error
There is a problem with the
printer and/or camera.
Turn off camera and printer.
Check the printer and remedy
any problems before turning
the power on again.
Cannot Print
Pictures recorded on other
cameras may not be printed on
this camera.
Use a personal computer to
print.