Olympus XZ-10 - Manual (Page 72)

72 EN
Information
8
Using a separately sold USB-AC adapter
The USB-AC adapter F-3AC (sold separately) can be used with this camera. Do not use any
AC adapter other than the dedicated one. When using F-3AC, be sure to use the USB cable
included with this camera.
Do not use any other AC adapter with this camera.
Using a separately sold charger
A charger (UC-50: sold separately) can be used to charge the battery.
Using your charger and USB-AC adapter abroad
• The charger and USB-AC adapter can be used in most home electrical sources within
the range of 100 V to 240 V AC (50/60Hz) around the world. However, depending on the
country or area you are in, the AC wall outlet may be shaped differently and the charger
and USB-AC adapter may require a plug adapter to match the wall outlet. For details, ask
at your local electrical shop or travel agent.
• Do not use travel voltage converters as they could damage your charger and USB-AC
adapter.
Using the card
Cards compatible with this camera
Commercially available SD/SDHC/SDXC/Eye-Fi/FlashAir (wireless LAN
mounted) card.
• For compatibility card details, visit the Olympus website.
• This camera can be used without a card by storing images in its
internal memory.

FlashAir or Eye-Fi card
# Cautions
• “FlashAir” SD cards have built-in wireless LAN and cannot be formatted. Use the software
supplied with the FlashAir card to format the card.
• Use the FlashAir or Eye-Fi card in compliance with the laws and regulations of the country
where the camera is used. Remove the FlashAir or Eye-Fi card from the camera or
disable the card functions in airplanes and other locations where use is prohibited.
g [Eye-Fi] (P. 54)
• The FlashAir or Eye-Fi card may become hot during use.
• When using a FlashAir or Eye-Fi card, the battery may run out faster.
• When using a FlashAir or Eye-Fi card, the camera may function more slowly.