Olympus E-30 - Manual (Page 109)

109
EN
Custom
izi
n
g your cam
er
a
7
Using reset settings
This resets the camera to the factory default settings. You can also reset the camera to the
[RESET1] or [RESET2] setting.
[RESET]
Resets to the factory default settings. For the default settings, see
“Menu directory” (
gP. 139).
[RESET1]/[RESET2] Resets to the registered settings.
• Holding down the F button and ISO button at the same time for 2 seconds performs [RESET].
• While pressing two buttons at the same time, turn the dial to select the reset setting. Release the
button to reset the settings.
1
Select [RESET], [RESET1] , or [RESET2] and
press the
i button.
2
Use ac to select [YES], then press the i
button.
Direct buttons F + ISO
Viewfinder : RESET
: RESET1
: RESET2
Control panel
Menu
MENU [W] [CUSTOM RESET]
RESET1
YES
NO
BACK SET
E-30_MASTER.fm Seite 109 Mittwoch, 3. Dezember 2008 1:56 13