Olympus E-30 - Manual (Page 56)

56
EN
3
Focusi
ng and
sh
ooting
functions
N Dynamic-single target AF mode
If the camera cannot focus on the subject using the selected
AF target, the camera focuses using the adjacent AF target.
• When the button is released, the currently selected AF target
lights. When M or N is set, you can select the AF target to
be used at that point. For operation, refer to Step 2 in
“Selecting the AF target position” (
gP. 56) in the next
section.
• When M or N is set, you can turn the dial to select the AF
target.
• When M or N is set, you can select the AF target with p.
Selecting the AF target position
Select the AF target to use with Single target AF mode.
1
Press the P button and release your finger to enable selection of the AF
target.
2
Use the main dial/sub dial or arrow pad to select
the AF target.
• Use the main dial to perform the same operation as
ac, and use the sub dial to perform the same operation
as bd.
• Press the i button to return the position of the AF target
to the center.
Selecting the operation when the AF target is selected:
j You can change the operation of the dials and arrow pad for selecting the AF target. g“P SET
UP” (P. 94)
Selecting the position of the AF target with the arrow pad without pressing the P
button:
j Press the shutter button halfway and release it, then use the arrow pad to change the position of
the AF target. g“n FUNCTION” (P. 97)
x
Notes
• When [LIVE VIEW AF MODE] is set to [IMAGER AF] or [HYBRID AF], you cannot use the
dynamic-single target AF mode.
Direct button P + j/k
Super control panel i p: [AF AREA]
P + k
Menu MENU [X] [AF AREA]
 TIPS
Selected AF
target
P button
i button
k
MENU button
j
E-30_MASTER.fm Seite 56 Mittwoch, 3. Dezember 2008 1:56 13