Olympus E-30 - Manual (Page 20)

20
EN
Basic operations
There are three ways to operate this camera.
Using the direct buttons to operate the
camera
gP. 21
You can make the function settings with the main dial
or sub dial and the direct buttons assigned to a
function. Setting information is displayed in the
viewfinder and on the control panel and super control
panel while you are setting a function. This is useful
for operating the camera while composing the subject
in the viewfinder and for quickly operating the camera
while checking the settings on the control panel.
Descriptions in this manual
The operating instructions of the direct buttons, super control panel and menu are described as
follows in this manual.
• “+” indicates operations performed at the same time.
• “ ” indicates you should proceed to the next step.
e.g.: When setting the flash intensity control
Direct button w k
Super control panel i p: [w]
Menu MENU [X] [w]
Resetting the camera
settings
In P, A, S, and M mode, current camera settings
(including any changes you have made) are retained
when the power is turned off. To reset the camera to
the factory default settings, set [RESET].
g“Resetting the camera settings” (P. 108)
Setting while looking at the super control
panel
gP. 22
You can make the function settings with the super
control panel on the LCD monitor. You can use the
super control panel to view the current settings and
directly change the settings.
Setting on the menu gP. 23
You can use the menu to set shooting and playback
settings and customize camera functions.
k
Sub dial
j
Main dial
E-30_MASTER.fm Seite 20 Mittwoch, 3. Dezember 2008 1:56 13