Safety alert symbol, Important notice, Control panel description – MBW CG200 User Manual
Page 14
12
SAFETY ALERT SYMBOL
This is the industry's SAFETY ALERT SYMBOL". This symbol is used to call
your attention to items or operations that could be dangerous to you or other
persons using this equipment. Please read these messages carefully. It is
essential that you read the instructions and safety regulations before you
attempt to assemble or operate this machine.
IMPORTANT NOTICE
CAREFULLY READ AND FOLLOW ALL SAFETY SIGNS. KEEP THEM IN GOOD
CONDITION. REPLACE ANY MISSING OR DAMAGED SAFETY SIGNS.
CONTROL PANEL DESCRIPTION
Read and understand the function of each control panel item
listed below before operating this machine.
1.
INDICATOR LAMP TEST: Push button for testing indicator lamp cluster.
2.
HOUR METER: Counts elapsed hours of machine operation.
3.
INDICATOR LAMP CLUSTER: Houses low fuel and engine warning lamps.
4.
GLOW LAMP: Glow plug indicator lamp.
5.
IGNITION SWITCH: Engine ignition switch.
6.
SIDE DRIVE UNIT: Switches Auto Height control from main unit center wheel to Side
Drive Unit wheel.
7.
RIGHT REAR DRIVE: Controls power to right rear drive wheel.
8.
MAIN POWER AND EMERGENCY STOP: Controls power to all non-engine related
functions.
9.
AUTO POWER: Controls power to on-board computer system.
10. HYDRAULIC POWER: Controls power to all hydraulic functions.
11. SPEED RANGE: Increases travel speed for quick transport.
12. ENGINE SPEED: Preset throttle operating position.
13. HEAD LIGHTS: Work light switch.
14. FORWARD-NEUTRAL-REVERSE: Controls travel direction.
15. TRAVEL SPEED: Controls travel speed. 0"= stop, 9"= maximum.
16. STEERING: FRONT SENSOR-MANUAL-REAR SENSOR: Activates automatic steering
computer module and selects steering sensor.
17. STEERING: Controls front wheel steering.
18. FRONT: Controls front wheel height adjustment.
19. HEIGHT: POUR-MANUAL-GRADE: Activates automatic height control computer
module and selects height sensor. Controls left most height cylinder.
20. RIGHT: Controls right wheel height adjustment.
21. CENTER: Controls center wheel height adjustment.
22. LEFT: Controls left (side drive unit) wheel height adjustment.
23. HEIGHT TRIM: Sets automatic height control zero reference point.
24. VIBRATORS: Controls power to vibrator potentiometers.
25. LEFT REAR DRIVE: Controls power to left (side drive) wheel.
26. VIBRATOR 1 POT: Controls main unit vibrator speed. (Right side of panel)
27. VIBRATOR 2 POT: Controls hopper unit vibrator speed. (Right side of panel)
28. VIBRATOR 3 POT: Controls hopper unit vibrator speed. (Right side of panel)