MBW CG200 - Manual (Page 54)

52
POURING CONDITIONS
ON GRADE The concrete is poured on the same surface the machine is run on.
BELOW GRADE The concrete is being poured at a surface lower than what the maĆ
chine runs on.
DROP POUR ADAPTERĆ
When pouring below grade, a drop pour adapter will be needed. A drop
pour adapter will extend the length of the hopper and bolts on similar to
a mold. Additional information is needed in order to manufacture a drop
pour adapter. Adapters can be made either closed or open side and drop
pour depth must be known. Drop pour depths can range from 4" to 10",
after 10" adapter and mold will have to be bolted on in the trench.
Note: There will be an additional charge for drop adapters.
CLOSED SIDE The side drive unit and mold are at a lower grade than the main unit.
DEPTH
OPEN SIDE The side drive unit and mold are at a lower grade than the main unit,
but the gutter side of the mold is left open. This allows you to pour up
against existing roadway.
EXISTING
ROADWAY
RUBBER FLAP
MOLD SIDE IS OPEN
DEPTH
Open mold requires
open drop adapter