INFICON Hydrostik Hydrogen Fuel Cylinder Installation - Manual (Page 5)

INSTRUCTION SHEET
Hydrostik Hydrogen Fuel Cylinder
Installation Instructions
PN 074-626-P1A
5 of 7
10 Wait five seconds, then turn the filling station valve to the OFF position ( Figure 2 ).
NOTE: Hydrostik will be cool to the touch when it is removed from the
hydrogen fill station.
11 Disconnect the Hydrostik adapter assembly from the fill station by pushing up on the
Hydrostik adapter quick connect (
Figure 6 ) to release it. Pull the entire assembly
down to remove from the fill station.
Figure 6 Remove Hydrostik adapter assembly from hydrogen fill station
Push up to release