INFICON Hydrostik Hydrogen Fuel Cylinder Installation - Manual (Page 7)

INSTRUCTION SHEET
Hydrostik Hydrogen Fuel Cylinder
Installation Instructions
PN 074-626-P1A
7 of 7 ©201
4 I
N
FICO
N
www.inficon.com [email protected]
Due to our continuing program of product improvements, specifications are subject to change without notice.
All trademarks are the property of their respective owners.
3 Guide the Hydrostik adapter assembly through the hydrogen cylinder holder and
push onto the hydrogen fuel inlet until a “click” is heard.
Figure 9 Guide Hydrostik into fuel inlet and put into CLOSED position.
4 Turn the Hydrostik adapter valve to the CLOSED, or horizontal, position until the
instrument is ready for use (
Figure 9 ).
5 Place the foam insert over the end of Hydrostik ( Figure 10 ).
Figure 10 Place foam insert over Hydrostik
6 Replace the hydrogen fuel cylinder retention plate and secure it with two captive
screws (
Figure 11 ).
Figure 11 Replace the hydrogen fuel cylinder retention plate