IPitomy IP550 User Manual Ver.1 - Manual (Page 14)

Operation
IPitomy Confidential 9
Switching Between Two Calls
To switch back and forth between the first and the second call, press the associated Line key.
For more detailed operation information, please refer to Appendix for MMI specifications.
3-Way Conferencing
To start a 3-way conference, you’ll need to press Conference key to hold the 1
st
call and
make another call. When the 2
nd
call is established, press Conference key again for 3-way
conference.
For more detailed operation information, please refer to Appendix for MMI specifications.
Using Speed Dial
The IP Phone provides user-specific speed dial feature via both soft keys and programmable
keys.
To set the speed dial number:
1. Set up in the web page, either in Softkeys 1~10, Softkeys 11~20, or Programmable Keys
page, the correct type, label, value and line.
2. Press the associated soft or programmable key.
3. The call can be made to the value via line specified.
For more detailed operation information, please refer to Chapter 5.
Do Not Disturb
The IP Phone provides Do Not Disturb feature via soft or programmable keys. Unlike many
other features provided in the phone, the DND is provided as a phone feature. That is, once
enabled or disabled, the phone will reject or receive incoming calls.
To set the DND:
1. Set up in the web page, either in Softkeys 1~10, Softkeys 11~20, or Programmable Keys
page, the correct type and the states.
2. Press the associated soft or programmable key.
3. The DND feature is enabled or disabled.
Using Headset
When Speaker key is pressed twice, handsfree will be replaced by headset automatically.
Placing Calls Using Headset
Press Speaker key twice will automatically seize a line just like user goes off-hook.