Web setup web setup web setup web setup – IPitomy IP550 User Manual Ver.1 User Manual

Page 19

Advertising
background image

IPitomy Confidential 14

Chapter

Chapter

Chapter

Chapter 5

5

5

5

Web Setup

Web Setup

Web Setup

Web Setup

The IP Phone can be configured via Web browser. The built-in Web server pro-
vides a user-friendly interface for setting and modifying parameters.

Overview

This chapter describes the setup procedure for configuring the IP Phone from a web browser.

After changing the settings, some new settings won’t take effect
until being saved and IP phone restarted. Use the Reset button on
the Reset screen to restart the IP Phone.

Configuration Program

The IP Phone contains an HTTP server. This enables you to connect and configure via web
browser. Your web browser must support JavaScript. The configuration program has been
tested on the following browsers:

• Firefox V2.02 or later
• Internet Explorer V6 or later

Preparation

Before attempting to configure the IP Phone, please ensure that:

• Your PC can establish a physical connection to network. The PC and the IP Phone must

be on the same LAN segment.

• The IP Phone must be installed and powered ON.
• By default, IP Phone will have a dynamic IP address, you can check it from Menu; press

Menu key, choose Network and select IP Address to check the IP address. The default
password is 1234.

Using Your Web Browser

To establish a connection from your PC to the IP Phone:

1. Start your web browser.

2. In the Address box, enter "HTTP://" and the IP Address of the IP Phone, for example:

192.168.1.250.

http://192.168.1.250/

5

5

5

5

Advertising