JULABO HT30-M1 High Temperature Circulator - Manual (Page 48)

Menu functions
48
Int.Programmer
>Edit
Delete
Print
Set Clock
>Edit Profile: 1
Step: 6
Setp: 100.00°C
Time[h.m] 01:05
Examples:
Profile No. 1
Step
Setpoint
Time
Edit
Compile profiles:
• A flashing segment indicates that a number needs to be entered.
Under submenu „Edit Profile“ enter a profile number.
Six profiles may be stored (nos. 0 to 5).
• Then programme the desired values for each section.
Use the keypad to set section number, target temperature and time
period. Set each entry with enter .
When the program is running, only sections having complete
information for target temperature and time period are considered.
It makes sense, to leave out section numbers in the profile, in order
to use them later for corrections in the profile.
Important:
If a time of 00:00 is set for a profile, the profile is continued with the
next section only after the setpoint temperature (±0.2 °C) is reached.
• Press escape
to return to the previous menu level.
Example:
Step
(No.) 1 3 5 6 9 11 14
Setpoint (°C) 50 50 100 100 80 80 20
Time (h:m) 00:08 00:02 00:10 01:05 00:10 00:05 00:30
Step
Edit Profile: 1
>Step: 3
Setp: 50:00°C
Time[h.m] 00:02
Display sections:
• Use the cursor keys
to select the submenu „Step“,
enter the desired number and press enter .
• The values previously set are displayed.