Cam designer basic – Lenze Cam Designer Basic User Manual
Page 26
Cam Designer Basic
Operation
Create a new project
26
2.1 EN - 09/2005
L
The name of the slave axis is shown in the worksheet and also used for the LCx-file.
Moreover, a subdirectory with this name is created in the project directory.
When selecting the Type "9300 EK (9300 servo cam profiler)" you can optionally indi-
cate the corresponding GDC file. The Gear factors and the Feed constant will then be
automatically read from this file.
If you have an online connection you can use the
button after the Drive input field
to assign a drive to the slave axis.
The selections under Absolute data model and Curve have a direct influence on the
maximum number of points. If you need more points for the table of points deactivate
the selection Absolute data model and use the relative data model or reduce the value
under Curve.
The maximum Curve depends on the selected type.
How to define the properties of the slave...
1. Go to the Slave dialog box to select the properties of the slave axis.
2. Click Next to proceed with the next step.