Lenze Cam Designer Basic - Manual (Page 30)

Cam Designer Basic
Operation
Create a new project
30 2.1 EN - 09/2005
L

How to add another slave to your worksheet...
1. Mark the master axis in the object list.
2. Select the command EditSlave axesAdd new axes.
• The dialog box Project settings of slave 2 is displayed (optional). You can accept
the settings.
3. Define the name and properties of the slave axis in the dialog box Project settings.
• The name of the slave is also used as name for the LCx file.
• The maximum product number determines the minimum number of curves.
The maximally possible entry depends on the target system.
How to define the properties of the slave...
( 26)
4. Select OK to accept the setting and close the dialog box.