Lenze Cam Designer Basic - Manual (Page 38)

Cam Designer Basic
Operation
Exiting Cam Designer Basic
38 2.1 EN - 09/2005
L
4. Click OK to save the project under the specified name in the selected directory and
close the dialog box.
• If you select the command FileSave the project will be saved with the new set-
tings.

Tip!
This way you can create a new project or a backup project on another data carrier
or in a directory other than the project directory on the basis of the current project.
6.7 Exiting Cam Designer Basic

Select FileExit or click the Window icon in the Title bar to exit the »Cam De-
signer Basic«.

Note!
Information on the single menu items can be found in the Online Help.
Make sure that the product numbers are not assigned twice and the correct path
has been selected for the LCx-file.
If the project is stored with Save as..., it should be stored in the same directory as
the LCx-files.

Note!
If you have not saved the changes made in one or several projects you will be
asked if you want to save them before exiting the Cam Loader.