Lenze Global Drive Cam Loader - Manual (Page 40)

Global Drive Cam Loader
Operation
Downloading the drive data
40 1.1 EN - 05/2005
L
X
How to download the drive data...
1. Select FileWDownload of multiple slaves... .
• This command can only be executed if the Cam Loader is connected to the OPC
server.
2. Go to the Download to controllers dialog box and select the slaves to be download-
ed:
• If the checkbox If necessary, download all data without queries is activated the
data will be downloaded without further queries.
• If the checkbox Do not show this dialog again until next program start is acti-
vated this dialog will not be indicated again until the next program start. This
can be useful for the commissioning of standard systems or in case of frequent
downloads.
3. Click the Start download button to start the data transfer.
Note: If you have not yet assigned a drive to one of the slaves the Drive selection
dialog box opens automatically.
• Double-click the drive to be assigned to the slave in the DriveServer tree:
• Click OK to confirm your selection and repeat the assignment for other slaves, if
necessary.