Calculated Industries 44060 - Manual (Page 13)

User's Guide — 11
[Conv] [ 9 ] — Total Cost
Computes total material cost given a unit dimension and an entered
Per Unit Cost.
[Conv] [ Stor ] — Access Preference Settings
Used to access various customizable settings, such as dimensional
answer formats
(see Preference Settings on page 96).
Memory and Storage Functions
Your calculator has two types of Memory:
1) basic memory or semi-permanent, cumulative
[M+];
2) non-cumulative Storage Registers (M1) and (M2).
[M+] — Semi-Permanent Memory
Adds any displayed number, dimensioned or unitless, to the semi-
permanent, accumulating Memory. Values can be subtracted from
this Memory using
[Conv] [M+]. [Rcl] [Rcl] will recall and clear the
Memory. [Conv] [Rcl] will clear the accumulating Memory without
disturbing the existing display.
[Stor] [1] — Storage Register (M1)
Stores the displayed value in non-cumulative, permanent Memory
(e.g., 10
[Stor] [1], [Rcl] [1] = 10). Good for storing a single value, for
future reference.
ю ю
Note: Non-cumulative means it only accepts one value (does not
add or subtract) and a second entered value will replace the first.
Permanent means the value is stored even after the calculator is
shut off. To delete a stored value, enter a new value or perform an All
Clear [Conv] [x].
[Stor] [2] — Storage Register (M2)
Same function as [Stor] [1]. See above.