Calculated Industries 44060 - Manual (Page 81)

User's Guide — 79
Rake Wall – With Base
Find each stud size in a Rake Wall with a peak of 4 feet, a length of 8
feet, and a base of 5 feet. Use 16 inches as your on-center spacing.
Keystroke Display
1. Enter rise, run, and o.c. spacing:
[On/C] [On/C] 0.
4 [Feet] [Rise] RISE 4 FEET 0 INCH
8 [Feet] [Run] RUN 8 FEET 0 INCH
[Rcl] [7]* OC 16 INCH
*If 16 is not displayed, enter 16 [Stor] [7].
2. Enter base and find stud lengths and angle of incline:
5 [Feet] [Conv] [Rise]
(R/Wall) OC 16 INCH
[Rise] RW 1 8 FEET 4 INCH
[Rise] RW 2 7 FEET 8 INCH
[Rise] RW 3 7 FEET 0 INCH
[Rise] RW 4 6 FEET 4 INCH
[Rise] RW 5 5 FEET 8 INCH
[Rise] BASE 5 FEET 0 INCH
[Rise] RW 26.57°
Rise
= 4’
Base
= 5’
Run= 8’