Catler CG 8010 - Manual (Page 10)

10
ASSEMBLING YOUR COFFEE GRINDER CG 8010
Before fi rst use
Before first use, remove and safely discard all pro-
motional labels and packing materials attached
to the device.
Wash hopper, cradles, grind container, container
lid and cleaning brush in warm soapy water and
dry thoroughly. Wipe exterior of grinder with
a soft damp cloth and dry thoroughly.
Place grinder on flat level surface and plug power
cord into 230-240V outlet and switch Power ‘ON’.
Assembling the grinder
Bean Hopper
Align tabs and place bean hopper into position.
Turn the bean hopper dial 90° to lock into
position. Fill with coffee beans and place lid on
top of bean hopper.
The bean hopper can be removed by turning
knob anti clockwise and lifting upwards to pull
bean hopper out.
The locking system allows you to remove and
transfer hopper without having to remove the
beans.
NOTE:
If Bean Hopper has not been locked into
position, ‘LOCK BEAN HOPPER’ message
will be displayed on the LCD screen
disabling the operation of the grinder
for safety.
ASSEMBLING YOUR COFFEE GRINDER CG 8010
153124_CG_8010_EN_.indd Odd1:10 153124_CG_8010_EN_.indd Odd1:10 17.5.11 13:10 17.5.11 13:10