Catler CG 8010 - Manual (Page 16)

16
CARE AND CLEANING
CARE AND CLEANING
1. Make sure the device has been switched
off by pressing START/CANCEL button. The
device is switched off if push-dial backlight
has gone off. Unplug the power cord from
the power outlet before cleaning.
2. Wash the grind container and lid, bean
hopper and lid in warm soapy water, rinse
and dry thoroughly.
3. Wipe and polish exterior of appliance with
a soft damp cloth.
NOTE:
Do do not use alkaline or abrasive
cleaning agents, steel wool or scouring
pads, as these can damage the surface.
NOTE:
We recommend you do not clean any
grinder parts or accessories in the
dishwasher.
WARNING:
NEVER IMMERSE THE POWER BASE,
POWER CORD AND PLUG IN WATER OR
ANY OTHER LIGUID. DO NOT EXPOSE
THE DEVICE OR ANY ITS PART TO
MOISTURE.
NOTE:
USE A SOFT CLOTH AND MILD DETERGENT
TO CLEAN THE APPLIANCE.
Storage
1. Ensure the appliance is switched off, cleaned
and dried before storing.
2. Ensure all accessories are clean and dry.
3. Wrap the power cord around the power cord
storage under the power base.
4. Store the appliance upright position. Do not
place anything on top.
153124_CG_8010_EN_.indd Odd1:16 153124_CG_8010_EN_.indd Odd1:16 17.5.11 13:10 17.5.11 13:10