Catler CG 8010 - Manual (Page 5)

55
CATLER RECOMMENDS SAFETY FIRST
CATLER RECOMMENDS SAFETY FIRST
We at Catler are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer foremost in mind.
In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions:
IMPORTANT SAFEGUARDS FOR YOUR COFFEE GRINDER CG 8010
• Carefully read all instructions before operation
and save for future reference.
• Remove and safely discard any packaging
material and promotional labels before using
the appliance for the first time.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug of
this appliance.
• This appliance has been designed specifically
for the purpose of grinding roasted coffee
beans only. Under no circumstances should
this product be used for other purposes than
it is intended.
• This appliance is not designed to grind pre
ground coffee in bean hopper. Under no
circumstances should this product be used
that is sticky, or extremely hard, or make
pastes of any fruits, seeds or herbs i.e. curry
pastes, nut batters.
• Do not insert any metal objects or similar
product into the bean hopper which could
damage or negatively influence the device
operation.
• Do not place the appliance near the edge of
a bench or table during operation. Ensure
that the surface is level, clean and free of
water.
• Do not place the appliance on or near a hot
gas burner, electric element or where it could
touch a heated oven.
• Do not operate the appliance on a sink drain
board.
• Before you connect the appliance into the
power outlet make sure the voltage on the
rating label corresponds to the voltage in
your power outlet.
• Always ensure the appliance is properly
assembled before connecting to a power
outlet and operating. Follow the instructions
provided in this book.
• Ensure the surface is level, clean and free of
water.
• This appliance is not intended to be operated
by means of an external timer or separate
remote control system.
• Before operation, ensure the bean hopper lid
is securely attached to the hoper.
• The device should not be switched on until
the bean hopper and hopper lid are locked
into position in the grinding chamber.
• Do not operate the device without locking
the bean hopper lid in position. Keep fingers,
hands, hair, clothing and utensils away from
the bean hopper during operation.
• Do not move the appliance if turned on.
Do not manipulate with the appliance if
placed on the power base and turned on.
• Do not put metal or similar items into the jug
as this may damage or affect the operation of
the unit.
• Always ensure the START/CANCEL button has
been pressed to cancel before attempting
to move the appliance, when the appliance
is not in use and before cleaning and
storing. The appliance is turned off if button
illumination goes off. Now, you can unplug
the appliance from the power outlet.
153124_CG_8010_EN_.indd Odd1:5 153124_CG_8010_EN_.indd Odd1:5 17.5.11 13:10 17.5.11 13:10