Vertical Communications 8012S - Manual (Page 45)

iPrimo Speakerphone Station User’s Guide
October, 02 Comdial 35
• To speed dial a personal speed dial number,
—While on hook, dial the speed dial number on the dial pad (0
to 9).
• To speed dial a system speed dial number,
—While on hook, dial * and the system speed dial number.
3.4 Redialing
For instruction on using your system’s Automatic Redial feature, see
page 89 in the Other Advanced Features chapter.
3.4.1 REDIAL - LAST-DIALED NUMBER
• To redial the last-dialed number,
1. Press SPEAKER or hang up the handset to disconnect the
current ringing or busy tone.
2. DIAL #.
3. Listen for ringing or busy tone over the telephone speaker.
Note: If you are already on a line, you must press SHIFT
before dialing the personal or system speed dial numbers that
are stored at the dial pad. Also, if a speed dial’s preselected
line is in use, the speed dial will not engage.
Note: Due to programming action, the available system speed
dial codes on some systems can be either *100 - *599, *000 -
*999, or *0000 -*1999.