Vertical Communications 8012S - Manual (Page 99)

iPrimo Speakerphone Station User’s Guide
October, 02 Comdial 89
7.4 Automatic Redial
If your station has the multiple automatic redial feature enabled, you
can place up to ten numbers in your telephone’s redial queue.
• To use the automatic redial feature to redial a busy or
unanswered number,
Figure 7-3 Initiating Auto Redial
1. While on the call, select Auto Redial or press the AUTO-
MATIC REDIAL button programmed by your installer.
2. The system repeatedly dials the number until you cancel the
feature or the system has dialed the number a pre pro-
grammed number of times (determined by your system
installer).
3. The AUTOMATIC REDIAL light flashes between redials and
turns on steady during redialing.
Note: The AUTOMATIC REDIAL button described in the fol-
lowing steps must be programmed by your system installer or
attendant. Individual users DO NOT have access to program-
ming of this feature.
Wednesday 19 11:36am
L123
CONF ARDL