Vertical Communications 8012S - Manual (Page 97)

iPrimo Speakerphone Station User’s Guide
October, 02 Comdial 87
7.3 Do Not Disturb Condition
This feature keeps calls from ringing at your IP speakerphone and
makes your station appear to be busy to intercom calls. As a reminder,
a station that is set in Do Not Disturb mode will display this infor-
mation on the display.
• To enable DND, proceed as follows:
1. Select OPTIONS.
2. Select Programming.
Figure 7-2 Setting Do Not Disturb
3. Select Do Not Disturb.
4. Select Do Not Disturb interact button to toggle between ON
and OFF.
5. Select EXIT.
• To disable the DND condition,
—Repeat the above procedure, but select OFF instead of ON at
step 4.
Background Music 1
Voice Announce Block OFF
Do Not Disturb ON
Contrast Level 6
EXiT PREV NEXT