Vinten Radamec HS-105P Pan & Tilt Head - Manual (Page 6)

Operators guide
5
Safety Guidelines
This product is designed and manufactured
to meet strict quality and safety standards.
However, it is important that you are aware of
the following operating precautions. Many of
these instructions are commonsense
precautions, but for your own safety and to
ensure that you do not damage the
equipment, we recommend that you read
them.
Responsibility
The Operator is responsible for the safe
operation of this product and all other
products forming part of the Autocam control
system, including robotic pan/tilt heads,
pedestals and cameras.
Safety when working with the
product
Take heed of warnings and
instructions
You should read all of the safety
instructions in this Operators
Guide before attempting to
operate the equipment. Adhere
to all warnings in this guide and
on the equipment. Do not
attempt to operate this
equipment if you do not
understand how to operate it.
Power sources
Connect the product to a power
supply of the type and voltage
rating described in the Technical
Data section of this Operators
Guide or as marked on the
product.
For an emergency power-down,
ensure all personnel are aware of
the location of the power switch
on the product and associated
equipment and power supplies.
!
Servicing
Do not attempt to service this
product. Opening and removing
covers may expose you to
dangerous voltages or other
hazards. Refer all servicing to
trained and competent
personnel. Contact Vinten
Radamec to arrange servicing of
this product.
Water, moisture and dust
Protect the studio version of the
product from water, moisture and
dust. The presence of electricity
near water can be dangerous. Do
not use the product near water
and take care that liquids are not
spilled onto the equipment. Only
the environmental versions of the
product should be used
externally.
Operating environment
The product should not be used
outside the operating
temperature limits. To prevent
risk of overheating, ventilate the
product correctly. Refer to the
Technical Data section of this
guide for the operating limits for
the product.
Connections
Turn OFF before connecting or
disconnecting any equipment or
making any adjustments to the
camera or associated equipment. OFF