Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI - Manual (Page 113)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-3
Network Connections
Overview
Adit MSR Connections
The MSR provides the following connections:
LCC 1-8 – Link Cross-Connects (LCCs) are resources that can be cross-connected to Adit 600
resources. There are three user-configurable types of LCCs:
- Data - Data-typed LCCs are used for PPP or MLPPP WAN links between the MSR card and
any available Adit 600 WAN destination, such as T1 lines or WAN-capable cards.
- Voice - Voice-typed LCCs are used for CAS links between MSR CAS trunk functionality
and Adit 600 external T1 lines. (E1 to be available in a future release.)
- PRI - PRI-typed LCCs are used for PRI links between MSR PRI trunk functionality and Adit
600 external T1 lines. (E1 to be available in a future release.)
Ethernet 1 - LAN Ethernet by default. (Can be configured for WAN usage.)
Ethernet 2 - WAN Ethernet by default. (Can be configured for LAN usage.)
The following types of connections can be created with the New Connection option:
Point-to-Point Protocol over DS0 (Serial) - Connect to the Internet using a PPP tunnel over
HDLC.
Multilink Point-to-Point Protocol over DS0 (Multilink) - Connect to the Internet using a
MLPPP tunnel over HDLC.
Point-to-Point Tunneling Protocol (PPTP) - Enable secure transfer of data to another
location over the Internet.
Point-to-Point Tunneling Protocol Server (PPTP Server) - Enable Virtual Private Network
(VPN) connections to your home network from other locations.
Layer Two Tunneling Protocol (L2TP) - Enable secure transfer of data to another location
over the Internet.
Internet Protocol Security (IPSec) - Enable secure transfer of data to another location over
the Internet, using private and public keys for encryption, and digital certificates for
authentication.