Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI - Manual (Page 127)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI 3-17
Network Connections
Connections that Require Configuration
Multilink
The Multilink Properties window displays the settings of a Multilink PPP over DS0 connection
configured with the New Connection option. (See New Connection on page 3-27.) Once the
connection is configured, you can select the connection to view its properties, modify its settings, or
disable/enable it.
A sample Multilink Properties window for the Adit MSR is shown below. Note that the Underlying
Devices are LCCs. For the Adit 3000, the Underlying Devices are T1s.
If necessary, you can modify the multilink connection by selecting the Settings button. The Configure
Multilink 1 window appears, as shown in the following figure.