Carrier Access Multi-Service Router (MSR) Card MSR/Adit 3K GUI - Manual (Page 212)

6-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) GUI
Voice over IP
IP Telephony
Configuring the Digit Map
The Digit Map is used to define phone-specific dialing behavior. A dial plan allows the phone to identify
that an entered number is complete and the call should be initiated. If the phone digit map is not defined
properly, a (SIP) call may be initiated before the user is done dialing.
To configure the digit map:
1. Select Voice over IP.
2. Select the IP Telephony tab.
3. Select FXS Digit Map.