DVR systems WatchNET Software - Manual (Page 62)

NDVR Server Manual
62
【Send Alarm to client】Select sending alarm to network clients or not.
【Motion Alarm Sound 】 Press button to selects a ―.wav‖ sound File
for a motion alarm. If there is a motion alarm, the sound file will be played.
Also, you can test it by pressing button.
【Send email】Set the send email alarm function disable or enable when
the cameras test abnormally.
【Send sms】Set the send sms alarm function disable or enable when the
cameras test abnormally.
【Video Loss Alarm Sound 】Press button to selects a ―.wav‖ sound
File for a video loss alarm. If there is a video loss alarm, the sound file will be
played. Also, you can test it by pressing button.
【Trigger DO Output】Select which DO ports will be triggered by above
camera alarms.
Schedule Setup (Setting for cameras of local board cards, IP Cameras
are not included.)
1. Motion & Video Loss (Red): NDVR System responds with Motion
Detection and Video Loss alarm in specified time;
2. Motion Alarm (Blue): NDVR System only responds with Motion
Detection alarm in specified time;
3. Video Loss (Yellow): NDVR System only responds with Video Loss
alarm in specified time;
4. Not Check (gray): NDVR System doesn’t respond with any alarms in
specified time.
Note: