DVR systems WatchNET Software - Manual (Page 81)

NDVR Server Manual
81
3.6 Alarm setup
Press button to set alarm parameters.
【Camera】Select a camera to be set from the drop-list and you can copy
the configuration to the other cameras by clicking copy button.
【Alarm Type】Select alarm type: Motion detection, Tampering alarm and
Video Loss.
【Level】Select sensibility levels from 0 (the lowest level) to 5 (the highest
level) for the alarm.
【Set motion detection areas】Left-click mouse and drag it on the screen
to select motion detect area, you can select the whole area or many areas.
Also, you can clear one or whole area by press the button clear and test the
effect by clicking test button.
【Policy】 Selecting ―Handling current alarm‖ firstly, handling policies will
be available as follows:
On screen warning
—Display the alarm information on the monitor.
Audio warning —Indicate the alarm with voice.
Upload to center —Update the alarm information to center.
Trigger alarm out
—Trigger alarm box to output the alarm.
【Trigger record camera】Set cameras to record triggered by the alarm.
You can select one or more channels. When there is alarm input, the cameras