DVR systems WatchNET Software - Manual (Page 68)

NDVR Server Manual
68
channels of them is not influenced by decoding channel. For IP cameras,
system use hard decoding, total channels of them are influenced by decoding
channels. For different work mode, the channels you can used are different,
the available certain channels must be the first certain channels. If you disable
hard decoding, you
can’t output real-time video of IP camera to TV Wall.
Note:
One camera is only showed in one window once. But you can show one
camera in 2 windows through switching the main camera channel and sub
camera channel.
【Video Switch Interval (sec) 】Set interval that each window shows
cameras circularly when there have more than one camera in it.
2.6.2 Display setup
【Display Group】System operator can set a groups of cameras to
display for fast preview, including its display mode and cameras. Up to 16
groups can be set.
【Video View Mode】Set the split mode, the split mode is same as main
window’s display split mode. There are1, 4,9,13,16,20,25,28,33,36,40,49 and
64 partition mode.
【Video Window】 【Display Camera in the window】After selecting video
split mode, there will have corresponding windows; select one camera show in
per window. The cameras include 64 cameras (the biggest of the system
limitation), when the total channels (cameras of local board card and IP
Cameras) are less than 64, some channels do not have image with black
window.
Note:
One camera is only showed in one window once, but each camera can be
displayed in any window discretionarily. E.g.: The 1
st
camera has been
displayed in window1, and the 2
nd
camera has been displayed in window2.
When change the 1
st
camera to be displayed in window2, the 2
nd
camera will
be exchanged in window 1 automatically.