Leica Geosystems GPS System 500 Equipment - User Manual - Manual (Page 12)

12
GPS Equipment User Manual - 4.0.0en
Getting started with the new Survey equipment
Measuring with the default configuration
Step 2: Study the Icons
Most important at this stage is the top
part of the screen which contains
several symbols (icons) which
indicate the current system status.
Accuracy No. visible GSM
Battery
Status Satellites Status
Status
Position No. Satellites Memory Local
Mode used on L1/ Status Time
L2
Radio Observation Auto
Position
Status Recording
Recording
Status
Status
Step 1: Power on
Turn on the sensor by pressing the ON-button on the terminal. One of the
following two screens will appear on the display:
Observation
Recording
Status
Auto Position
Recording
Status
Local
Time
Battery
Status
Memory
Status
GSM
Status
Radio
Status
No. Satellites
used on L1/L2
No. visible
Satellites
Position
Mode
Accuracy
Status