Vertical Communications R DSU - Manual (Page 30)

•
To answer telephone paging from any station,
1. Lift handset.
2. Press INTERCOM, dial 88, and meet paging party on line.
•
To enable or disable the Tracker pager at your station,
1. Press INTERCOM.
2. Dial ✳ 06 to enable, or #06 to disable.
• To send a call back message to someone’s Tracker Pager after
receiving a ring-no-answer,
1. Make an intercom call to someone and receive no answer.
2. Dial #01.
3. After your station returns to idle (if the Tracker paging system
does not accept your action, you will hear an error tone), hang up
the handset or press SPEAKER to end. The Pager-Tracker system
will transmit your station extension number to called party’s
Tracker Pager display. (Some models will also display your station
name if the system is programmed to include station names.)
•
To park a call and have Tracker Pager tell someone to retrieve the
call.
1. Answer call and press TRANSFER/CONFERENCE.
2. Dial extension number and hear ringback.
3. Dial # 0 1.
4. Hang up handset or press SPEAKER to end. The Tracker paging
system will transmit orbit dialing code and caller ID information,
if available, to called party’s Tracker Pager display.
(Alpha/numeric models display #91 through #99 while
numeric-only models display -91 through -99.)
•
To respond when your Tracker Pager displays park orbit dialing
code,
1. From any system station, press INTERCOM.
2. Dial displayed orbit code (#91–99).
3. Retrieve call.
Using The Other Telephone Features GCA70–248
7 – 2 Non-LCD Station User's Guide