Vertical Communications R DSU - Manual (Page 41)

Programming
Your Telephone
9.1 Programming Your Telephone
•
To store autodial numbers,
1. Press INTERCOM and dial ✳ ✳ 1.
2. Press programmable button.
3. Press line button, or dial 1, 2, 3, or 4, to select line groups 1–4, or
dial 0 for system to select line.
4. Dial number to be stored (16 digits maximum).
To store hookflash in an autodial sequence, press TAP; press
HOLD to store pause (only if needed).
5. Press TRANSFER/CONFERENCE, then press next
programmable button, and dial another number to be stored.
6. Repeat previous step until finished then press SPEAKER.
NOTE: You can store an autodial number at a second level at a DSS
button if you wish.
•
To store extension numbers at DSS buttons,
1. Press INTERCOM and dial ✳ ✳ 3.
2. Press programmable button.
3. Dial extension number.
4. Press next programmable button and dial another extension
number.
5. Repeat previous step until finished then press SPEAKER.
9
GCA70–248 Programming Your Telephone
Non-LCD Station User's Guide 9 – 1