Vertical Communications R DSU User Manual
Page 33
7.6
Engaging Automatic Set Relocation
NOTE: If this feature has been enabled by your system programmer,
the message-waiting light will flash for several seconds when
you connect your telephone to another location. This means
that the system is waiting to automatically relocate your
extension number and other programmed features to the new
location.
If you do not want your telephone to have its old programming after
relocation, reject the automatic relocation.
•
To accept automatic relocation,
1. Do nothing and wait for the light to turn off on its own, or press the
HOLD button to immediately accept the relocation (light
immediately turns off).
•
To reject the automatic relocation,
1. Press the # button while the message waiting light is flashing.
GCA70–248
Using The Other Telephone Features
Non-LCD Station User's Guide 7 – 5