Longshine LCS-WRN-3211 - Manual (Page 39)

Wireless 11n Router
38
Items Information
IP address & Subnet Mask
Fill in IP address & Subnet Mask that match the same
subnet provided by your Internet Service Provider (ISP).
Username and Password
Fill in Username and Password that provided by your
Internet Service Provider (ISP).
Idle Time
The value specifies the number of idle time that elapses
before the system automatically disconnects the PPTP
session.
MTU Size
To Enable the Maximum Transmission Unit of Router
setup. Any packet over this number will be chopped up
into suitable size before sending. Larger number will
enhance the transmission performance.
Enter the MTU number in the blank to set the limitation
(default 1460 bytes).
Request MPPE Encryption
Mark to enable the Microsoft Point-to-Point Encryption
function. MPPE compresses data across PPP or VPN
links.
Request MPPC Compression
Mark to enable the Microsoft Point-to-Point Compression
function. MPPC can only be used in products that
implement the Point to Point Protocol AND for the sole
purpose of interoperating with other MPPC and Point to
Point Protocol implementations.
Attain DNS Automatically
If your DNS provide by ISP is dynamic, choose “Attain
DNS automatically
DNS 1~3
To specify the Domain Name System (DNS). The DNS
server translates domain names into IP addresses. Enter
the DNS provided by your ISP in 1
st , 2 nd and 3 rd server.
* Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations.
5. L2TP
The Layer Two Tunneling Protocol (L2TP) provides a standard method for transporting the link
layer of the Point-to-Point Protocol (PPP) between a dial-up server and a Network Access Server,
using a network connection in lieu of a physical point-to-point connection.