Longshine LCS-WRN-3211 - Manual (Page 41)

Wireless 11n Router
40
6. Common configurations for WAN interface
There are some settings are able to be configured on each WAN access types:
Items Information
Clone MAC Address
When ISP use MAC address authentication (with
DHCP), then the MAC address of the Ethernet card
attached to your Cable modem must be registered with
the ISP before connecting to the WAN (Internet). If the
Ethernet card is changed, the new MAC address must
be registered with the ISP.
MAC cloning feature allows the MAC address reported
by WAN side network interface card to be set to the
MAC address already registered with the ISP
eliminating the need to register the new MAC address
with the ISP. This feature does not change the actual
MAC address on the NIC, but instead changes the
MAC address reported by Wireless Router to client
requests. To Change the MAC address, enter it in the
text box.
Enable Web Server Access on
WAN from port
To Enable the user to access this Router with WAN
port IP address from Internet
Enable IPsec pass through on
VPN connection
Mark the check box to enable IPsec pass through on
VPN connection and clear the checkbox to disable.
Enable PPTP pass through on
VPN connection
Mark the check box to enable PPTP pass through on
VPN connection and clear the checkbox to disable.
Enable L2TP pass through on
VPN connection
Mark the check box to enable L2TP pass through on
VPN connection and clear the checkbox to disable.
* Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations.