Vertical Communications GCA70-248 - Manual (Page 51)

LCD Message List
(Write attendant supplied messages here.)
Dial Code Message
5
6
7
8
9
Assist Button Message Delivery
If you have preprogrammed an ASSIST button on your telephone, you can use it to
send a message to your supervisor, asking for assistance while you are on a call. Your
message shows in the supervisor’s telephone display.
· To send a message for assistance,
1. PRESS ASSIST button that you have programmed.
2. PRESS
DSS/BLF of the telephone user you need help from. (This
is not necessary when the desired extension number was stored
along with the ASSIST button programming.)
3. If the assisting telephone is idle, a ring burst sounds and a
message appears in its display. If it is busy, the message appears
when it becomes idle.
Non-LCD Speakerphone Station User’s Guide 43
GCA70-248 Nonverbal Messaging