Vertical Communications GCA70-248 - Manual (Page 63)

NOTE: When the call ends, the system resets the loudness of all future calls
to the programmed (default) setting. For instructions in setting your sta-
tion’s default volume, see Default Volume Control section in the system spe-
cific Advanced Features chapter.
· There are eight headset loudness levels that you can set for
the current call as follows:
1. While on a call and in headset mode,
PRESS the
VOLUME UP OR VOLUME
DOWN button once for each change in
loudness that you desire.
· There are eight group listening
loudness levels. Set the level for the
current call as follows:
1. While on a call and in the group listening
mode, PRESS
VOLUME UP OR VOLUME
DOWN button once for each change in
loudness you desire.
· There are eight background music loudness levels. To set
the level,
1. While background music is on at your station, PRESS
VOLUME UP
OR
VOLUME DOWN button once for each change in loudness you
desire. This level will remain set for background music until you
change it again, even if you turn off the feature and then reactivate it.
Muting Your Station (not available on 8112N)
By using the
MUTE button, you can block transmission of your voice to the distant
party. You can do this whether you are using the handset or the speaker.
· To mute your station,
1. PRESS
MUTE (mute function and light turn on). You can still
hear the distant party, but he or she cannot hear you.
· To speak to the distant party,
1. PRESS
MUTE again (mute function and light turn off).
Non-LCD Speakerphone Station User’s Guide 55
GCA70-248 Other Advanced Features
Impact Volume Buttons