Vertical Communications GCA70-248 - Manual (Page 66)

Tracker Paging System
The optional Tracker paging system allows you to send and receive messages on
Tracker Pagers assigned to station extension numbers. The Tracker system will also
park calls in orbit for retrieval by the paged party.
· To enable a Tracker Pager at your station,
1. PRESS
INTERCOM.
2. DIAL
*06
.
· To disable a Tracker Pager at your station,
1. PRESS
INTERCOM.
2. DIAL
#06
.
· To send a call back message to someone’s Tracker Pager
after receiving a ring—no answer,
1. MAKE an intercom call to someone and receive no answer.
2. PRESS programmed TRACK button OR DIAL
#01
.
3. After your station returns to idle* hang up handset or press
SPEAKER to end. The Pager—Tracker system will transmit your
station extension number to called party’s Tracker Pager display.
(Some models will also display your station name if the system is
programmed to include station names.)
* If the Tracker paging system does not accept your actions, an error tone sounds at your telephone.
· To send a call back message to someone’s Tracker Pager
without first calling them,
1. PRESS
INTERCOM.
2. DIAL
#01
.
3. DIAL station extension number.
4. HANG UP handset OR PRESS
SPEAKER to end. The
Pager—Tracker system will transmit your station extension
number to the caller’s Tracker Pager display. (Some models will
also display your station name if the system is programmed to in-
clude station names.)
58 Non-LCD Speakerphone Station User’s Guide
Other Advanced Features GCA70-248