Vertical Communications EP100 - Manual (Page 35)

CONVERSip EP100 User
Sept ‘04
Comdial 37
2. Select NEXT until VAB appears.
3. Select VAB.
4. Select ON to block (or OFF to unblock).
5. Press SPEAKER to end.
2.7 Caller ID (Automatic Number
Identification)
When installed by system programming, the Caller ID feature allows
you to view incoming call numbers before you answer them.
Incoming call numbers flash in the lower half of the LCD. If you
answer the call, the number appears in the upper half of the LCD.
The system also stores numbers that ring on your line but receive no
answer. If the call has been returned by someone else, selecting the S
key reveals who returned the call. Everyone sharing your line can
scroll through the stored numbers and choose which calls to return.
To scroll through ring-no answer numbers stored on your system
(CID light is flashing),
Your
Station
SOHVA
Delivering
Station
INCOMING
SOHVA
VERBAL
NONVERBAL
BLOCK
SOHVA RESPONSES
Press and Hold MUTE
While Speaking
Select MSG And
Choose Message
To Deliver
Select BLOCK
To Disconnect
Answering aa SOHVA