Vertical Communications EP100 - Manual (Page 72)

Programming
74 Comdial
Sept ‘04
6.3 Feature Access Codes
In addition to the system features which may be programmed using
the soft keys, several other features may be programmed by using
their access codes. The feature codes are programmed like speed dial
numbers and can occupy the same programmable buttons on your
telephone. Access codes are listed in Appendix A, Feature Access
Codes.
To store a system feature access code,
1. Select OPTIONS.
2. Select NEXT until SDIAL
option appears.
3. Select SDIAL to choose speed
dial programming.
4. Press programmable button or
dial pad button (0–9) to choose
storage location (remember, to access second level storage at a
programmable button, press SHIFT first).
5. Press INTERCOM when prompted to preselect line.
6. Dial access code associated with
feature.
7. Select SAVE to store the number.
8. Repeat previous steps until all
numbers are stored, or select
EXIT.
9. Press SPEAKER to end.
To manually store an access code,
1. Press INTERCOM.
2. Dial **3.
3. Press programmable button.
4. Dial access code for feature.
5. Press SPEAKER to end.
Location
EXIT
Choose a Location
Dial Number
SAVE BKSP EXIT
Dial the Access Code