Vertical Communications EP100 - Manual (Page 81)

CONVERSip EP100 User
Sept ‘04
Comdial 83
To enable DND, proceed as follows.
1. Select OPTIONS.
2. Select NEXT until the DND
option appears.
3. Select DND.
4. Select ON.
5. Select EXIT.
6. Press SPEAKER to end.
Note: Although it does not appear on your screen while Do Not
Disturb is displayed, the right soft key activates the Options menu.
To disable the DND condition, proceed as follows.
1. Select OPTIONS.
2. Select NEXT until the DND option appears.
3. Select DND.
4. Select OFF.
5. Select EXIT.
6. Press SPEAKER to end.
To set a Do Not Disturb condition at
your telephone when a call rings at your
station,
1. Hear ringing and notice incoming
call information in display.
2. Select DND. Ringing stops, and
the caller hears the do not disturb
tone. Your telephone remains in
DND until you disable the feature.
7.4 Automatic Redial
If your station has the multiple automatic redial feature enabled, you
can place up to 10 numbers in your telephone’s redial queue.
Do Not Disturb
ON OFF< EXIT
Setting Do Not Disturb
J Doe Ext 321
DND ANS
Blocking Calls with DND