Labconco WaterPr BT Systems 90151 Series - Manual (Page 18)

Installation
10
Installation of the Filter Pack cartridge
ATTENTION
Open the Tank Outlet Valve before installing a new Filter Pack cartridge. This
keeps the tank from filling until the Filter Pack cartridge is rinsed out.
HAZARD Do not touch the UV Lamp when replacing the Filter Pack cartridge.
Installation
A • Make sure the front cover is opened (this may require removal of the
final filter).
B • STANDBY should be viewed on the Display.
• Remove the Filter Pack cartridge from its shipping box.
• Remove the protective caps on the ports of the Filter Pack cartridge
and from the system.
C • Locate the O-rings on the ports and wet them with water. It is
preferable to wet them with ultrapure water.