Labconco WaterPr BT Systems 90151 Series - Manual (Page 35)

Using the WaterPro® BT System
27
3 Press the Dispensing Button once.
The system will dispense water. The
Display will show the amount of
water dispensed and the Product
resistivity.
NOTE: To stop dispensing water,
press the Dispensing Button once
again.
4 To exit the menu, press and hold the
Main Button for 2 seconds. To
display the next menu option, press
the Main Button once.
The WaterPro® BT water systems has been designed to operate permanently
connected to feed water, plugged to an electric power source and in regular
operating mode. Do not unplug the WaterPro® BT system except when required by
the user manual for maintenance purposes. Do not place the system in STANDBY
mode except when maintenance needs to be performed.
ATTENTION