Charge cooler installation, cont’d – Vortech 2003-2005 Lexus 3.0L IS300 User Manual
Page 26
Advertising
P/N: 4LA020-010
©2007 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
11JUL07 v1.1 Lexus(4LAv1.1)
18
Fig. 6-p
6.
CHARGE COOLER INSTALLATION, cont’d
V.
Connect the previously installed sleeves
using discharge duct “E” and two #44 hose
clamps. (See Fig. 6-p.)
W.
Locate the factory MAF harness. Carefully
split the plastic flex-loom exposing the wire to
the sensor connector. Separate enough
length to reach the new MAF sensor location,
and re-wrap the flex-loom. Reconnect the
harness plug to the MAF sensor.
TUBE “E”
Ø3" x Ø2.75"
REDUCER
Ø3" x Ø2.75"
REDUCER
Advertising