Dynex OPSYS MW 91000051 - Manual (Page 36)

Configuring the System
Configuring the System
The Opsys MW™ must be configured before it is operated for the first time.
The commands for doing this are contained in the SETUP menu (Figure 7).
Use ARROW keys to scroll through the menus.
1: TESTNAME
SETUP PROGRAM
Select Option
VERSION CAL.
Select Option
HEAD PLATE
Figure 7. SETUP Menu
The purpose of each command on the SETUP menu is summarised below:
Command Purpose
HEAD Specify the type of head that is fitted
PLATE Displays the PLATE menu. The commands on this
menu allow parameters (such as well top height,
dispense height and wash height) for various plate
types to be specified.
VERSION Displays the version number of the software
CAL. Displays the CAL. menu. The commands on this
menu allow the pump parameters to be specified.
CLEAN The CLEAN command enables the washer to be
cleaned automatically at a specified interval. This
feature assists in assuring that tubing and dispense
pins are free from potential salt build up.
28 Opsys MW™ User’s Guide