Dynex OPSYS MW 91000051 - Manual (Page 45)

Configuring the System
Selecting Clean
The CLEAN command enables the washer to be cleaned automatically at a
specified interval.
1. Scroll right to display the next section:
Select option
CLEAN
2. Select CLEAN. The display will read:
Auto Clean?
YES
NO
3. Select YES if you want periodic automatic cleaning. The display will
read:
Interval (Hrs) 1
4. Enter the desired interval using the up/down scroll keys and press
ENTER.
Note: The minimum interval is 1 hour, and the
maximum interval is 9 hours.
The display will read:
Fluid Volume? 2500
5. Enter the desired volume of fluid to be dispensed.
Note: A cleaning volume ranging from 50 to
9,999 microliters can be entered. Follow the
instructions on page Error! Bookmark not
defined. for refilling the wash container.
6. Press ENTER. The display will read:
Select option
CLEAN
Opsys MW™ User’s Guide 37